Evelino Tile Adhesive C1 Grey – Type 1T (Interior Floor & Wall)
Evelino Tile Adhesive C1 Grey is our standard cement-based adhesive for laying ceramic, clay and terracotta tiles indoors — on concrete floors and plastered walls. It's polymer-modified for better grip than plain sand-cement, has a self-curing property that helps it hydrate properly even on hot, dry sites, and grabs tiles fast enough that you're not holding them in place on a wall while it sets.
view productEvelino Tile Adhesive C2 Grey – Type 2T (Vitrified & Tile-on-Tile)
C2 Grey is a step up from our standard C1 adhesive, built for tiles that don't absorb much — vitrified, porcelain and natural stone — where you need a stronger mechanical bond rather than relying on the tile's own porosity. It's also rated for tile-on-tile work, so you can lay over sound existing tile in a bathroom or kitchen renovation without tearing everything out first, and it's waterproof enough for wet areas.
view productEvelino Tile Adhesive C2 Plus Grey Type 3 (Exterior Facade & Wall Cladding)
This is our adhesive for jobs where the substrate moves — high-rise facades that flex with wind and heat, large-format tiles, heavy natural stone slabs. It's S1-rated for deformability, meaning it can absorb thermal expansion and structural movement without the bond cracking, and the extended open time gives you more than 30 minutes to position heavy slabs correctly before it starts to set.
view productEvelino Tile Adhesive C1 White – Type 1T (Non-Staining Glass Mosaic & Marble)
Grey adhesive under a glass mosaic or a pale Italian marble tends to show through as a dull shadow or a dark edge — this is the white-cement version made to avoid that. It's the same C1-grade performance as our grey adhesive, just formulated with pure white cement so it doesn't discolour light or translucent tiles, and it holds tiles in place on vertical surfaces without slipping while it cures.
view product
Evelino Lastic – Two-Component Elastomeric Adhesive
Lastic is what we recommend when the substrate itself isn't rigid — timber floors, plywood, metal panels, drywall — surfaces that expand, contract or flex in ways a standard cement adhesive can't handle. It's a two-part system: cementitious powder mixed with an acrylic latex copolymer, curing into a flexible, fully waterproof bond that can absorb several millimetres of movement without letting go. It's also non-reactive with moisture-sensitive stones like green marble, so it's a safe choice for natural stone on dynamic surfaces.
view productEvelino Tile Adhesive C2 White – Type 2T (Vitrified & Marble Wet Area Adhesive)
This is our C2 adhesive with a white-cement base, for jobs that need both the higher bond strength of C2 grade and the colour protection of white cement — typically Italian marble or glass mosaic going into a bathroom, pool, or fountain. Same waterproof, high-bond formula as our grey C2, just without the risk of grey staining through light-coloured stone.
view product
Evelino 2-Part Epoxy Grout (Stain-Free & Chemical Resistant)
Standard cement grout absorbs water and stains over time; this doesn't. Evelino's 2-Part Epoxy Grout is a chemical-cure system — resin, hardener and colour aggregate mixed together — that sets into a non-porous joint filler with essentially zero water absorption. That makes it a good fit for commercial kitchens, labs, swimming pools and any high-traffic area where you don't want grout lines turning into a cleaning problem.
view product
Evelino Epoxy Liquid (High-Bond Adhesion Resin)
For jobs where a cement-based adhesive isn't strong enough — heavy stone cladding, structural crack repair, underwater or high-moisture bonding — Evelino Epoxy Liquid is our resin-based option. It's a two-part epoxy that cures properly even in damp or humid conditions, holds its volume without shrinking (useful when you're levelling a slab), and bonds to concrete, steel, wood and ceramic as well as stone.
view product
Evelino Stone Backside Sealer
Applied to the underside of a slab before installation, Evelino Stone Backside Sealer does two things: it reinforces stone that's thin, fissured, or prone to cracking during handling and transport, and it blocks moisture from the setting bed migrating up through the stone and causing staining or efflorescence on the visible face. It's a standard step in stone fabrication for book-matched slabs, large-format panels, and any stone that's naturally fragile or porous on the back.
view productEvelino Tile Adhesive C2 Plus White Type 3 (High-Strength White Exterior Facade)
The white-cement version of our C2 Plus Type 3 facade adhesive, for the same demanding exterior applications — heavy natural stone, large-format porcelain, high-rise cladding — but where a grey adhesive would risk staining through light or white stone. It carries the same S1 deformability and extended open time as the grey version, so it handles thermal movement and gives you time to position large panels correctly.
view productEvelino Multipurpose Tile Adhesive (Standard Interior Grey Cement Glue)
This is our everyday adhesive for standard interior tiling — ceramic, terracotta, clay, regular quarry tiles — where you don't need C1 or C2-grade specs, just a dependable bond at a reasonable price. It's polymer-modified for better flexibility than plain sand-cement mortar, grabs tiles quickly on walls, and works on the usual residential substrates: concrete, plaster, cement render.
view product