Evelino Thixotropic Vinyl Epoxy Gel – 10kg Kit
Evelino Vinyl Epoxy Gel is a two-part, knife-grade epoxy built for stone fabricators and flooring contractors who need a repair that disappears into the slab. Mix Part A and Part B in a 2:1 ratio and it stays where you put it on vertical cuts instead of running, cures at room temperature without shrinking, and can be tinted to match marble, granite or travertine so the repair isn't the first thing anyone notices.
view product
Evelino Thixotropic Vinyl Epoxy Gel – 1kg Kit (2:1 Mix Ratio)
This is the same formula as our 10kg Vinyl Epoxy Gel, just in a smaller kit — handy for spot repairs, one-off jobs, or trying the product before committing to a bigger pack. Same knife-grade consistency, same near-zero-shrinkage cure, same tintable finish for repairs that don't stand out on marble, granite or travertine.
view product
Evelino Crystallizers & Shiner (Marble Floor Vitrification Liquid)
Crystallizers & Shiner is a concentrated liquid that chemically reacts with the calcium carbonate in marble, terrazzo and limestone, forming a hard calcium fluorosilicate layer on the surface. Run it under a single-disc machine with a white or red pad and the reaction hardens the stone as it polishes — that's what gives you the mirror gloss you see on well-kept lobby and hotel floors, and it holds up against foot traffic better than a topical polish alone.
view product
Evelino Penetrating Stone Sealer – Satin Finish (Stone Impregnator & Protector)
This sealer works from the inside out — instead of sitting on top of the stone like a topical coating, it soaks into the pores of marble, granite, slate and terrazzo and bonds there, so oil, wine, dirt and water can't work their way in and stain the stone. It leaves a satin finish rather than a glossy plastic-look coating, so the natural veining and colour of the stone still come through, and it's formulated not to yellow over time. Being UV and weather resistant, it holds up on exterior stone too.
view product
Evelino Diamond Silicate Polishing Powder (Active Marble Restoration Compound)
This is a two-part process in one product: micro-diamond abrasives level out scratches, etch marks and traffic wear, while active silicates react with the stone to densify it from within, leaving a harder, better-protected surface underneath the shine. It comes in multiple grits, so you can go from a rough restoration cut on a badly worn floor down to a fine mirror-polish grit with the same water-based, non-toxic powder — safe to use in homes, hotels and hospitals.
view product